CAE | Short Shifter | Race Shifter | BMW Shifter | ALU Shifter

Shifter fits to all 6 Zyl cars G/J 29
No Drilling in the middle tunnel required
The center console only needs to be minimally modified for Installation.
Short and super-precise shifting travel, exclusively H-pattern.
The clutch system remains in its original form.
perfect positioning of the shift lever closer to the steering wheel. The shift pattern is confined to approx. 75 x 75 mm.
Activation of the reverse gear lock via cable reel from the shift lever. An accidental changing to the reverse gear is impossible. The reverse gear is unlocked by pulling up the sliding collar on the shift lever.
Low weight and high stability: the milled and lathed parts consist of 7075 aluminium alloy; the substructures are made out of millcutted 3 mm thick AlMg3 aluminium. The parts are combined in the WIG welding process and brushed blank for an optimal finish.
Problem-free shifting of gears under stress or in curves.
Integrated centre position spring, ensuring perfect feedback when changing columns while shifting up and down.
Right/left stops and reverse gear stop adjustable separately.
Complete kit including CAE Shift rod "L"; all small parts and fastening material
Surface of the shifter and shift knob selectable in different versions, optional against extra charge wrapped with grey alcantara with colored X-seam

Total height:	approx. 315 mm
Total length:	approx. 184mm
Dimensions of base plate:	184 x 115 mm
Shifting travel:	approx. 75 mm
Selector travel (transverse direction):	approx. 75 mm
Weight (complete):	approx. 1,1 kg
Offset of the gear lever knop (back / up):	depending on vehicle type approx. 0 / 100 mm